Polyurethane Windshield Adhesive — Fast Curing Auto Glass Glue with High Bond Strength, Black Windshield Sealant for Vehicle & RV Window Seal, Urethane Adhesive with Gloves, OEM Quality, 10.5 fl oz

The sealing works as advertised and seals up any leaks you have I would recommend heating up the tube in hot water for 30 minutes to an hour for easier use on a caulk gun good price for a good product

Used to reattach the sliding rear window track on an F150. It worked great. It was easy to use and the only thing I would have done differently would he to put the bead of adhesive on the truck and not the track. That's because it could easily get on the upholstery if your not extra careful maneuvering the track back onto the truck. Don't forget to scrap off the old primer and clean the back window and area real good. Then use a good primer- I used Calvana Windshield Primer.

This is a highly trusted, professional-grade adhesive offering high-strength permanent bonding and a non-sagging formula that meets strict OEM retention demands.

Have purchased from this seller a couple of times. This stuff is incredible. Works well. Cures fast.

I purchased this polyurethane windshield adhesive for a DIY windshield replacement, and it works well. The bond strength is impressive — once cured, the windshield feels secure and stable, giving me confidence it will hold up over time. The fast-curing formula is convenient, but you have to work quickly and carefully. The adhesive sets faster than I expected, so applying it evenly and positioning the windshield correctly requires focus. The nozzle helps with precision, but a steady hand is important to avoid excess adhesive seeping out. Overall, this is a reliable, high-strength adhesive. It’s great for windshield installations as long as you’re patient and precise during application. I’d recommend it for DIYers and professionals alike.

Worked well, great brand

Quality urethane for a great price!

04 solara convertible rear window fell in. Bought this stuff. Heated it in boiling water for 10-15 minutes. Prepped the surface of the glass by using a heat gun and a wire when In a drill to clean off all the old sealant on the window. Crazy messy but it worked. You want a clean surface. Then i used the wire wheel on the thick canvas of the top to clean off the old material as best i could. I laid a bead around the entire window then let it sit for 5-10 minutes. This allowed it to get tacky. Placing the window in was tricky. Took me and my daughter. You have to position it square in the opening then press the glass hard against the top. I was finally able to it to stay by stuffing blankets and pillows in the top cavity so that it was pushing fairly hard against the glass which was pushing against the top sealing surface. I then drove it for a couple days before removing the blankets and pillows. So rubbing alcohol does a decent job at getting this stuff off, but fair warning, it WILL get all over your clothes, your face, your hands. Blankets, pillows, convertible top and the dog too. End result was it drying extremely secure. Window Is in there solid now! You’ll likely need to get in there with rubbing alcohol, heat gun, razors etc to clean it all up after it’s dried. Sure is messy, but fixed it without An expensive interior shop bill

Well recommend

Grad adhesive for glass

Bonne produit facile à utiliser ça fonctionne avec un pistolet ordinaire pour silicone, il faut seulement retirer fermeture en arrière et l’intérieur il y a na un plastique pour pouce

Great project very strong stuff

Worked great to seal a window that was leaking after a bad install filling roof and center console with water. Saved another trip to town and dealing with a company that’s didn’t care to do it right the first time. Thank you.